171
Applying effects using the1.Select the data you want to process. If no data is selected, Sound Forge applies the effect chain to the entire file.
2.From the View menu, choose
Click the Open
3.To use an existing chain preset, choose the chain from the Chain Preset
4.Configure the parameters of each
5.Click the Preview button () to test the effect chain. If needed, you can select different parts of the audio in the data window to preview different sections before applying the effect chain. You can also click the
Bypass button ( ) to temporarily bypass the effect. For more information, see Bypassing effects on page 174.
Tip: You can also click the Play
6.If the effect changes the duration of a sound (for example, Reverb or Simple Delay), choose how Sound Forge processes the audio tail created by the effect. For more information, see Selecting the processing mode for audio tail data on page 173.
Note: The Insert Tail Data and Mix Tail Data commands may not function when using
7.Click the Process Selection button () to apply the effect chain.
Press Ctrl + Shift + P .
CHP. 11 | APPLYING EFFECTS |