175
Removing plug-ins from a chainTo remove a specific plug-in from a chain, select it and click the Remove Selected Plug-Inbutton (). Sound Forge removes the plug-in and adjusts the remaining plug-ins.
Press Ctrl + Tab to select the next plug-in or Ctrl + Shift + Tab to select the previous plug-in, and then press Ctrl + Delete to remove the selected plug-in from the chain.
You can also remove a plug in by right clicking a plug-in in the chain and choosing Remove from the shortcut menu.
Configuring chained plug-insTo configure the parameters of specific plug-in, select it from the chain. The plug-in’s parameters display, allowing you to adjust all controls as needed. For help on the different plug-in controls, click the Help for Plug-Inbutton () or click a control and press Shift + F1 .
Saving individual plug-in settings as a custom presetOnce you have adjusted effect parameters in the Plug-In Chainer window, you can save your settings as a custom preset for later use. You can select a custom saved preset from the Preset drop-down list to apply the same effect settings at a later time.
You also have the option of saving the entire chain as a chain preset. For more information, see Saving plug-in chains on page 175.
1.Adjust the effect parameters in the Plug-In Chainer window to achieve the effect you want.
2.Enter a name for the new preset in the Preset box.
3.Click the Save Preset button (). The new preset is saved in the Preset drop-down list.
Saving plug-in chainsOnce you’ve set up an effect chain, you may want to save it for later use. When you save a plug-in chain, you not only save the order of the effects in the chain but also the parameters of each individual effect.
1.Create an effects chain in the Plug-In Chainer window.
2.Enter a name for the new chain in the Chain Preset box.
3.Click the Save Chain Preset button ( ). The new chain is saved in the Chain Preset drop-down list.
Enter a name in the Chain Preset box.
Click the Save Chain Preset button to save the new chain.
Press Ctrl + S , enter a name for the preset, and press Enter .