227

Using the Crossfade Loop tool

1.Open the Loop.pca file. A sustaining loop appears in the data window.

2.From the Tools menu, choose Crossfade Loop. The Crossfade Loop dialog appears.

3.Drag the Loop slider to configure the percentage of the loop to be crossfaded.

30% loop crossfade

80% loop crossfade

4.If desired, select the Post-Loopcheck box and drag the slider to configure the percentage of the loop to be crossfaded into the post-loop audio.

20% post-loop crossfade

90% post-loop crossfade

5.From the Preview mode drop-down list, specify how the Preview button operates: Loop the Loop, Play Loop

through Post-Loop, or Play as One Shot.

6.Preview and tune the crossfade until you cannot detect the loop transitions.

7.Click OK.

CHP. 15

LOOPING