Marking track numbers

You can mark track numbers:

•Automatically during recording

Track numbers are automatically marked as on the original source during recording from this system’s CD player. However, track numbers may not be marked for some tracks (see page 71). Use the Level Synchro Recording function to automatically mark track numbers during recording from this system’s tuner or components connected to the VIDEO jacks or the TAPE IN jacks. However, you cannot mark track numbers automatically if the sound source to be recorded is noisy (e.g., tapes or radio programmes) or during timer-recording.

•At any point during recording

You can mark track numbers during recording any sources.

•After recording

Use the Divide Function (see page 48).

Marking track numbers automatically during

recording — Level-Synchro Recording

The Level Synchro Recording function is factory set to on, so the track numbers are automatically marked. If “L-SYNC” does not appear during recording, turn on the Level Synchro Recording as follows. Track numbers are automatically marked when the input signal is continuously below a certain level for more than two seconds and then exceeds that level.

Note

You can not mark track numbers automatically if the sound source to be recorded is noisy (e.g., tapes or radio programmes).

?/1

(Power)

1

3,4,5

 

 

1

2

3

4

5

MD s 2 7 3,6 4,5

1 Press one of the function buttons you want to record (e.g., TUNER).

2 Press REC/REC IT to stand by for recording.

3 Press MENU/NO.

“Setup?” appears, then press ENTER/YES.

34