•Never put your hand into the cartridge compartment. The thermal head reaches high temperatures, especially after repeated printing.

•Do not rewind the ink ribbon and use the rewound print cartridge for printing. Otherwise, proper printing result will not be obtained, or even a malfunction may occur.

•If the print cartridge does not click into place, remove it and then re-insert it. If the ink ribbon is too slack to be loaded, wind the ink ribbon in the direction of the arrow to remove the slack.

•Do not remove the print cartridge while printing.

Notes on storing the print cartridge

•Avoid placing the print cartridge in a location subject to high temperatures, high humidity, excessive dust or direct sunlight

•When you are going to store a partially-used cartridge, store it in its original bag.

4Inserting the print paper

1 Open the eject paper tray.

2 Slide the paper tray lid in the opposite direction to the paper feeding direction (1) and then lift open it (2).

3 Set the tray adaptor according to the print paper size you want to use.

Note

In some regions, 3.5 x 5 inch size print paper is not sold. And the tray adaptor is not supplied.

Continued

Preparations

13 GB