Additional information

PrecautionsOn safety

•Be careful not to set or drop any heavy objects on the power cord, or to damage the power cord in any way. Never operate this printer with a damaged power cord.

•Should any solid object or liquid fall into the cabinet, unplug the printer and have it checked by qualified personnel before operating it any further.

•Never disassemble the printer.

•To disconnect the power cord, pull it out by the plug. Never pull the power cord itself.

•When the printer is not going to be used for an extended period of time, disconnect the power cord from the wall outlet.

•Do not handle the printer roughly.

•To reduce the risk of electrical shock, always unplug the printer from the electrical outlet before cleaning and servicing the printer.

On installation

•Avoid placing the printer in a location subject to:

–vibration

–high humidity

–excessive dust

–direct sunlight

–extremely high or low temperatures

•Do not use electrical equipment near the printer. The printer will not work properly in electromagnetic fields.

•Do not place heavy objects on the printer.

•Leave enough room around the printer so that the ventilation holes are not blocked. Blocking these holes may cause internal heat build-up.

On the AC adapter

•Be sure to use the AC adapter supplied with the printer. Do not use other AC adapters, as this may cause a malfunction.

•Do not use the supplied AC adapter to other devices.

•Do not use an electrical transformer (travel converter), as this may cause overheat or a malfunction.

•In case the cord of the AC adaptor is disconnected or damaged, never use it any longer, as this may cause danger.

On moisture condensation

If the printer is brought directly from a cold location to a warm location or placed in an extremely warm or humid room, moisture may condense inside the unit. In such cases the printer will probably not work properly and may even develop a fault if you persist in using it. If moisture condensation occurs, unplug the AC power cord of the printer and do not use the printer for at least one hour.

On transport

When you transport the printer, remove the print cartridge, paper tray, AC adapter, the memory card, or an external device from the printer and put the printer and its peripherals in the original box with the protective packaging.

If you no longer have the original box and packing parts, use similar packing material so that the printer will not be damaged while being transported.

On cleaning

Clean the cabinet, panel and controls with a soft dry cloth, or a soft cloth lightly moistened with a mild detergent solution. Do not use any type of solvent, such as alcohol or benzine, which may damage the finish.

On restrictions on duplication

If duplicating documents with the printer, pay special attention to the following:

•Duplication of banknotes, coins, or securities is against the law.

•Duplication of blank certificates, licenses, passports, private securities, or unused postal stamps is also against the law.

•TV program, films, video tapes, others’ portraits or other materials may be copyrighted. Unauthorized video printing of such materials may infringe the provisions of the copyright law.91 GB

information Additional