xTo use Post Card (4 x 6 inch) size print paper

Press the tray and the back of the tray adaptor to release the locks of the adaptor (1), and remove and lift the tray adaptor from the lock holes (2).

Release the lock.

Tray adaptor

To attach the tray adaptor to the tray

4 Set the print paper into the tray.

Riffle the print paper. Then insert the print paper with its printing surface (the side with no imprint) facing up.

To set the Post Card size print paper, face the stamp marker to the paper feeding direction.

To set the 3.5 x 5 inch size print paper, align an arrow imprint to the

paper feeding direction.

Insert the protective sheet together with paper. You can set up to 20 sheets of print paper.

Printing surface

Put the projections of the tray adaptor into the lock holes of the front of the tray (1), and then slide down the adaptor until its back lock clicks into place (2).

Paper feeding direction

Note

Face stamp marker (Post Card size) or arrow imprint (3.5 x 5 inch size) toward feeding direction.

xTo use 3.5 x 5 inch size print paper

Keep the tray adaptor installed.

Tray adaptor

Do not touch the printing surface. Fingerprints on the printing surface may result in imperfect printing.

5 Remove the protective sheet.

14 GB