2Press f/F to select “Selected Image” and then press g.
The main menu is displayed again.
3 Press PRINT.
Image numbers and print quantity for the images stored in the selected memory card or external device are displayed.
Image number | Print quantity |
Tip
You can display the “Select Image” window by pressing G in step
4 Press f/F to select the image number of the image you want to print and then press ENTER or CANCEL to set the print quantity.
•To increase the print quantity one by one, press ENTER.
•To decrease the print quantity one by one, press CANCEL.
•To cancel the selection, press CANCEL for more than two seconds. (You cannot do this operation with the remote commander.)
You can set up to 20 copies of print quantity for an image.
CANCEL
5 Repeat step 4 to set the print quantity for the images you want to print.
6 Press PRINT.
Printing of the selected images starts. During printing, printing process is displayed on the LCD display.
To stop printing
Press CANCEL. When you are printing multiple copies, the next printing after the one currently printing will be cancelled.
7 When printing is complete and the print paper automatically emerges, remove the printed paper from the paper tray.
For the notes during printing, see page 23.