Sony DPP-FP50 Printing from a PictBridge camera (PictBridge mode), 57 GB, the digital camera, Printing images from, prints:, •DPOF print, •Date print, print an image

Printing from a PictBridge camera (PictBridge mode)

	5 Operate the digital camera to
Printing images from
	print an image.
the digital camera	The printer supports the following
	prints:

You can connect a PictBridge-compliant digital camera and print an image directly from your digital camera.

1 Set your digital camera ready for

	printing with a PictBridge-
	compliant printer.
	The settings and operations that are
	necessary before connection differ
	depending on the digital camera. For
	details, see the operating instructions
	of the digital camera you use. (In case
	of Sony Cyber-shot digital camera, for
	example, select “PictBridge” mode for
	the “USB Connect”. )
	Note
	When you use a DSC-T1, you need to
	update software version.
2	Connect the printer to the AC
	power source (page 17).
3	Press ON/STANDBY to turn on the
	printer (page 17).

The ON/STANDBY indicator of the printer lights in green.

•Single-image print.

•All images print (ALL)

•Index print (INDEX)

•DPOF print

•Border/Borderless print

•Date print

For notes during printing, see page 23.

Notes

•If you replace a print cartridge while the printer is connected to a PictBridge-compliant digital camera, an image may not be printed properly. If this occurs, disconnect and then connect the digital camera.

•If you print an image from your digital camera without picture quality settings, it will be printed according to the settings of the Set Up menu.

a from Printing

4 Connect a PictBridge-compliant digital camera to the PictBridge/ CAMERA connector of the printer (page 20).

When you connect a PictBridge- compliant digital camera to the printer, “The printer is being connected to PictBridge camera.” is displayed on the LCD display of the printer.

mode) (PictBridge camera PictBridge

57 GB