Saving an image
When you finish editing or making creative print or you select “Save” in the window, the dialog box to select the media to save the image in is displayed. You can save the image under a new file number.
Tip
The selected image will not be overwritten.
1 Select the destination to save an image.
Press f/F to select the media (“Memory Stick”, “Compact Flash”, or “SD Cards) and press ENTER.
The dialog box for setting date is displayed. You can save the date with the image.
2 Set date.
Press f/F to select the number and press g/G to select the day, month or year. Then press ENTER.
The image is saved. The dialog box to notify the new file number is displayed.
3 Press ENTER.
Note
While saving the image, do not turn off the printer or remove a memory card from the printer. The memory card may be damaged.
Printing an image
1 Press PRINT.
The dialog box to specify the print quantity is displayed.
2 Set the print quantity.
•To increase the print quantity one by one, press ENTER repeatedly.
•To reduce the print quantity one by one, press CANCEL repeatedly.
•To reset the print quantity to one, press CANCEL for more than two seconds. (You cannot do this operation with the remote commander.)