To correct characters in the input box
•To delete a character before the cursor ( ) in the input box
Press g/G/f/F to select “BS” (Back Space) and press ENTER. Each time you press ENTER, a character before the cursor is deleted.
•To insert a character among the input characters
Press g/G/f/F to select “B” or “b” on the window and then press ENTER repeatedly until the cursor () moves to the position where you want to insert a character.
6 After you finish entering the remaining characters, press g/G/ f/F to select “NEXT”, and then press ENTER.
The keyboard is closed and the input characters are superimposed on the image.
Adjustment tools
Items Procedures
Re-input The keyboard is displayed. Input characters again.
Each time you press ENTER, the characters become larger.
Each time you press ENTER, the characters become smaller.
Move the characters with g/ G/f/F, and then press
ENTER.
Each time you press ENTER, the characters rotate 90° clockwise.
Each time you press ENTER, the characters rotate 90° counterclockwise.
Note
If a number of input characters is large, you may not be able to rotate, increase or decrease the size of characters.
7 Press g/G/f/F to select the desired adjustment tool, then press ENTER to adjust the size and position of the characters.
To make multiple adjustments, repeat this step.
8 Press f/F to select “Execute”, then press ENTER.
The characters are fixed to the image.
Note
Once you select “Execute”, you cannot move or delete the characters.