1 | Insert one plug of the supplied AC |
| power cord to the supplied AC |
| adapter. |
2 | Insert the other plug of the AC |
| power cord to the wall outlet. |
3 | Insert the plug of the AC adapter |
to the DC IN jack of the printer. The ON/STANDBY indicator lights in red.
•Be sure to use the AC adapter supplied with the printer. Do not use other AC adapter, as this may cause malfunction.
•In case the cord of the AC adapter is disconnected or damaged, never use it any longer, as this may cause danger.
•Do not short the DC plug of the AC adapter with a metallic object, as this may cause malfunction.
•Do not use the AC adapter in a narrow space, such as the one close to the wall.
4 Press ON/STANDBY.
The ON/STANDBY indicator lights in green.
Preparations
To DC IN
AC adapter (supplied)
To the wall outlet
AC power cord (supplied)
Notes
•Connect the AC adapter to an easily accessible wall outlet close by. If some trouble occurs while using the adaptor, immediately shut off the power by disconnecting the plug from the wall outlet.
•When you have finished using the AC adapter, disconnect it from the DC IN jack of the printer and the wall outlet.
•The set is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet , even if the unit itself has been turned off.
•The print paper emerges from the paper outlet a few times during printing. Do not block the paper outlet with the AC adapter or AC power cord.
Using your printer abroad
You can use your printer in any country or region with the AC adapter (supplied) within 100 V to 240 V AC, 50/60 Hz. Use a commercially available AC plug adaptor [a], if necessary, depending on the design of the wall outlet (wall socket) [b]/
Note
Do not use an electronic transformer (travel converter), as this may cause a malfunction.