Connecting to the AC power source
1 Insert the plug of the AC adaptor into the DC IN 24 V jack on the back of the printer.
2 Connect one plug of the AC power cord to the connector of the AC adaptor and the other plug to the wall outlet.
Notes
•Do not place the printer in an unstable location such as on a wobbly table.
•Leave enough room around the printer. The print paper emerges from the back a few times during printing. Keep 10 cm (13/32 inches) or more space at the rear of the printer.
•Connect the AC adaptor to an easily accessible wall outlet close by. If trouble occurs while using the adaptor, immediately shut off the power by disconnecting the plug from the wall outlet.
•Do not short the plug of the AC adaptor with a metallic object, as this may cause a malfunction.
•Do not use the AC adaptor placed in a narrow space, such as between a wall and furniture.
•When you have finished using the AC adaptor, disconnect the AC power cord from the
DC IN 24 V jack of the printer and from the AC power sources.
•The printer is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the printer itself has been turned off.
10 cm (13/32 inches)
| AC adaptor |
| To the wall |
AC power cord | outlet |
To use your Printer abroad - Power sources
You can use your Printer and the AC Adaptor (supplied) in any country or region where the power supply is within 100 V to 240 V AC, 50/60 Hz. Use a commercially available AC plug adaptor [a], if necessary, depending on the wall outlet (wall socket) [b].
Do not use an electronics transformer (travel converter), as this may cause a malfunction.