Printer rear panel

AHandle

As illustrated below, raise the handle when you carry the printer.

When you use the printer, close the handle to its original position.

Notes

•When you carry the printer, make sure to remove memory cards, external devices, the paper tray, AC adaptor, and other cables. Otherwise malfunctions may occur.

•When using the DPP-FP95, set the LCD panel to its original position.

BVentilation holes

CPaper outlet

DDC IN 24 V jack (.page 12)

Plug the supplied AC adaptor into this connector. Then connect the AC adaptor and AC outlet with the power cord.

Printer left side panel

EHDMI OUT (output) connector (.page 43)

When using the printer with a High-definition television, connect an HDMI cable into this connector.

F USB connector (.page 53)

When using the printer in PC mode, connect a USB cable to this connector.

GPictBridge/EXT INTERFACE connector (.pages 46 to 48)

When using a PictBridge-compliant digital camera, a mass storage device such as a USB memory or photo storage device, a Bluetooth USB adaptor (DPPA-BT1*), or other external USB device, connect it via this connector.

(*In some regions, the DPPA-BT1Bluetooth USB adaptor is not sold.)

8 GB