To specify the trimmed portion
Press g/G/f/F to select 
trimming tool, and press ENTER. Press g/G/f/F to move the cursor to the position that you want to specify as the beginning point of the trimmed area, then press ENTER.
Repeat the same procedures to specify the ending point of the trimmed area.
The color selection window is displayed.
4Press g/G/f/F to select the desired color and then press ENTER.
The window used for adjusting the superimposed image is displayed.
For how to adjust an image, see step 5 on page 27.
5Press g/G to select 
and press
ENTER.
A preview of the selected image superimposed on the background image is displayed.
xSuperimposing a standard format message
1Press g/G to select 
(Standard format message), then press ENTER. The window used for selecting a standard format message is displayed.
2Press f/F to select the desired message and press ENTER.
The color selection window is displayed.
3Press g/G/f/F to select the desired color and then press ENTER.
The window used for adjusting the message is displayed. For how to adjust
an image, see step 5 on page 27.
4Press g/G to select 
and press
ENTER.
A preview of the superimposed message on the background image is displayed.