*6 The printer does not support 8 bit parallel data transfer.

Notes on use

•For the latest information on the “Memory Stick” types that the printer supports, see the “Memory Stick” compatibility information on the Sony web site: http://www.memorystick.com/en/support/ support.html

(Select the area where you use your printer, and then select “Digital Printer” from each area page.)

•Do not insert more than one “Memory Stick” at the same time, which may cause trouble with the printer.

•If you insert a “Memory Stick Micro” into the printer without an M2 adaptor, you may be unable to remove the “Memory Stick Micro”.

•If you insert the “Memory Stick Micro” into an M2 adaptor, and insert the M2 adaptor into a Memory Stick Duo adaptor, the printer may not operate properly.

•When you format a “Memory Stick,” use the format function of the printer or your digital camera. If you format a “Memory Stick” with your computer, images may not be displayed properly.

•When you format a “Memory Stick,” all the data including the protected image files will be erased. To avoid erasing important data by accident, make sure to check the contents of the “Memory Stick” before formatting.

•You cannot record, edit or delete data if you slide the write-protect switch to LOCK.

Connector

Write-protect switch

Write Write

enable protect

position position

LOCK LOCK

Place the label here.

•Do not attach any other material than the supplied label on the labelling position. When you attach the supplied label, be sure to attach it to the labelling position. Be careful that the label does not stick out.

SD Card

The SD Card slot of the printer allows you to use the following:
•SD card*1
•miniSD card, microSD card (An adaptor is necessary.)*2
•SDHC memory card*3
•MMC standard memory card*4

We do not guarantee proper operations for all types of SD cards and MMC standard memory cards.

*1 The printer has been demonstrated as operable with an SD Card with a capacity of 2 GB or smaller.

*2 Some commercially available card adaptors have projected terminals on the rear. This type of adaptor may not work properly with the printer.

Terminals

*3 The printer has been demonstrated as operable with an SDHC card with a capacity of 8 GB or less.

*4 The printer has been demonstrated as operable with an MMC standard memory card with a capacity of 2 GB or less.

Continued

information Additional

81 GB