Adjusting an image
1 From the 
Edit menu (page 18), press g/G to select 
(Adjust) and then press ENTER.
The Adjust menu is displayed.
2 Press f/F to select the desired adjustment tool and press ENTER.
The adjustment screen of the selected tool appears.
When “Brightness” is selected.
Adding a special filter to an image
1 From the 
Edit menu (page 18),
press g/G to select 
(Filter) and then press ENTER.
The Filter menu is displayed.
3
4
Press g/G to adjust an image while checking the level.
The image before adjustment is displayed on the left half of the screen, and the adjusted image is displayed on the right.
•Brightness: Press G to brighten the picture or g to darken it.
•Tint: Press G to make the picture greenish or g to make it reddish.
•Saturation: Press G to deepen the colors or g to lighten them.
•Sharpness: Press G to sharpen the outlines or g to soften them.
Press ENTER.
The adjustment takes effect.
Press PRINT.
.
2 Press f/F to select the filter you want to add to the image.
•No Filter: No special filter is used on the image (default setting).
•Single Color: Changes all the colors except for the one specified color into gray scale.
•Painting: Makes the image look like a painted picture.
The “Painting” filter of the printer is uses the technology of Ichikawa Soft Laboratory.
•Cross Filter: Adds a cross, starburst effect to the light source to print an image with a sparkling impression.
•Partial Color: Makes the surroundings of the subject monochrome to emphasize the subject in the center.