•When you are using a television that does not support the control for HDMI or you connect a television with the printer for the first time, your television may not switch input automatically. If this occurs, switch the input manually to display the printer pictures on the television.

Procedures for switching the input differ depending on the type of a television. For details, see the manual supplied with your television.

•If you remove or connect an HDMI cable while the printer is performing an image-processing, printing or other time-consuming job, the display may switch between LCD and television. Until the job is competed, however, the display may show unusual view.

During copying file, deleting file or other file operations , do not remove or connect an HDMI cable. Doing so cancels the job.

Printing procedures

Using the printer buttons for printing

1 Insert a memory card into the printer.

2 Press g/G and ENTER of the printer to select an image, and then press PRINT to start printing.

The printing procedures are the same as those with the printer itself. You can perform Edit and CreativePrint operations.

Note

During the Edit and CreativePrint operations, the black lines appear top, bottom, right and left edges of the screen and the pictures displayed are rough.

Using the television remote control unit for printing

If your television supports the control for HDMI, you can use the remote control unit of your television to operate the printer.

Notes

•We cannot guarantee operations with all types of televisions.

•When you are using a Sony TV, you cannot use the TV remote control to operate the printer if the TV does not support BRAVIA Sync (Sync menu compatible).

•To operate the printer, the %5$4, [Enter], [Return] buttons of the remote control support the HDMI control.

•If the HDMI control setting of your television is off, you cannot use the TV remote control to operate the printer. Settings differ depending on the television you use. For details, see the manual supplied with your television.

•If “CONTROL FOR HDMI” is set to “Off,” you cannot use the TV remote control to operate the printer (page 42).

xBasic printer operations with a TV remote control unit

•When a cursor is displayed in an index view or menu display, you can move the cursor by pressing %5$4.

•When no cursor is displayed in an image preview, press $ or a link menu button to display the operation panel such as the printer operation panel on the TV monitor. Press %5$4 on the TV remote control unit to select an item and then press [Enter] button.

Operation panel displayed on the TV monitor

44 GB