Making layout prints
1 From the CreativePrint menu (page 19), press g/G/f/F to select
“Layout Print,” then press
ENTER.
The Layout Print templates are displayed.
2 Press g/G/f/F to select the desired template, then press ENTER.
The preview of the selected template is displayed
3 Select an image.
When you select a template with multiple images, select an image for each area. For how to select an image, see step 4 on page 26. When you select image(s), the window for adjusting the image is displayed.
4 Adjust an image.
For how to adjust an image, see step 5 on page 27. When you adjust an image, the image is added to the image area.
To add a stamp, see “Superimposing a stamp” on page 31.
5 Press PRINT.
Making an ID photo
1 From the CreativePrint menu (page 19), press g/G/f/F to select “ID Photo,” then press ENTER.
The window used for setting the height and width of an ID Photo is displayed.
Tip
You can set a maximum size of 7.0 (width) x 9.0 (height) cm.
2 Press g/G/f/F to select the item that you want to adjust, and press
ENTER.
•To specify the unit: Select the text box at the left of the photo frame. You can select either “cm” or “inch.”
•To specify the height: Select the figure box at the right of the photo frame.
•To specify the width: Select the figure box in the upper of the photo frame.