Recording

Recording Procedure

Playback and Recording 2 Chapter

This section describes the procedure to perform a recording on this unit, showing an example session in which playback signals coming from a player VCR will be recorded on the tape loaded in the unit.

REMOTE/LOCAL switch

1

60 ) p r

2

Recorder (DSR-85/85P)

3

6 0

) p

Player (DSR-60/60P, etc.)

Notes

•When controlling this unit from an editing controller, set the REMOTE/ LOCAL switch to “REMOTE”. When not, set the switch to “LOCAL”.

•If you intend to use a tape recorded on this unit in a system comprising this unit and an ES-7 EditStation, it is recommended to record color bars on at least the first 40 seconds of the tape.

When transferring digital signals from this unit to the ES-7 EditStation at quadruple speed, there must be recording for approximately 40 seconds before the IN point.

1 After checking the following items, hold the cassette so that the tape window is facing upward, then insert it into the recorder (this unit) as illustrated on the next page.

Item to check

See section

 

 

Make sure that the cassette’s “REC/

“Preventing accidental erasure” (page

SAVE” switch is set to “REC”.

27).

Check for tape slack.

“Checking the tape for slack” (page

 

27).

 

 

Make sure that the “HUMID!” alarm is

“Condensation” (page 69)

not shown in the display window.

 

 

 

24

Chapter 2 Recording and Playback