Playback and Recording 2 Chapter
For this purpose: | Do this: |
Stop playback | Press the STOP button. |
| The unit enters stop mode, and will automatically |
| switch to standby off mode after 8 minutes. |
Adjust the audio playback | Use the audio level control on the monitor. |
level |
|
Search while viewing | Press and hold either F FWD or REW button to |
| search at 32 times normal speed in forward or |
| reverse direction. To return to normal playback |
| mode, press the PLAY button. |
| Note |
|
| The search picture will not be displayed unless “F. | |
| FWD/REW” under the AUTO EE SELECT menu | |
| item is set to “PB”. | |
|
| |
Inhibit the unit from | Change the menu settings. | |
outputting text information | See “CHARA. DISPLAY” (page 43) in Chapter 4 | |
(time data, operation mode | “Menu Settings”. | |
indications, etc.) to the |
|
|
video monitor. |
|
|
|
| |
Remove the cassette | Press the EJECT button. | |
| After a few seconds, the tape is unwound from the | |
| head drum and the cassette is automatically ejected. | |
| If a CNT value is shown on the time counter display | |
| (assuming the time data type indicator “COUNTER” | |
| is lit), the CNT value is reset. | |
Disable the automatic | Change the menu settings. | |
rewind function | See “AUTO REW” (page 42) in Chapter 4 “Menu | |
| Settings”. | |
|
| |
Change the time period | Change the menu settings. | |
before the unit switches to | See “TAPE PROTECTION” (page 46) in Chapter 4 | |
standby off mode from stop | “Menu Settings”. | |
mode |
|
|
30 | Chapter 2 Recording and Playback |