Playback and Recording 2 Chapter
This section describes the necessary settings and operations to perform playback on this unit. The same settings and operations apply whether you are using the unit as part of an editing system, for dubbing, or as a stand- alone videocassette player. For the necessary connections for playback and the settings not covered in this section, see Chapter 5 “Connections and Settings”.
Settings for PlaybackVideo monitor
2
Player
1
6 0 | ) p r |
1 Power on this unit by pressing on the “ 1” side of the POWER switch.
2 Power on the video monitor and set the monitor’s switches as shown below.
Switch | Setting |
|
|
75 Ω termination switch | ON (or attach a 75 Ω terminator) |
|
|
Input switch | Set according to the type of input signal from this unit. |
|
|
28 | Chapter 2 Recording and Playback |