Playback Procedure

1 2

REMOTE/LOCAL switch

6 0

) p r

Note

When controlling this unit from an editing controller, set the REMOTE/

LOCAL switch to “REMOTE”. When not, set the switch to “LOCAL”.

1 Insert a cassette.

For details of cassette insertion see page 24, and for usable cassette types see page 22.

The cassette is automatically drawn into the unit. The STOP button will light, and a few seconds later a still image will appear on the monitor screen.

2 Press the PLAY button.

This starts the playback operation. When the tape is played back all the way to the end, the unit automatically rewinds it and then stops.

If the following indicators light when a cassette is loaded

Indicator :

It means:

Cassette memory indicator

The loaded cassette contains a cassette memory.

 

 

ClipLink indicator

There is ClipLink log data stored in the cassette

 

memory on the loaded cassette.

NOT EDITABLE indicator

The tape was recorded in the DV format.

 

You cannot use it as a recording tape for editing.

 

(but as a source tape for playback and editing)

 

 

Using this unit to play back a tape recorded on another device When playing back a tape on this unit that was recorded with a DV format VCR or some DSR-series VCRs, it is not possible to play back the first 10 seconds of the tape, because of the different tape loading mechanism. For any tape to be played back on this unit, it is recommended to make a preliminary recording for about 10 seconds at the beginning.

Playback and Recording 2 Chapter

Chapter 2 Recording and Playback

29