Menu contents (Continued)

OPERATIONAL FUNCTION [Operational]: Operation

Description of settings

settings

 

 

 

PREROLL TIME [> Preroll]: Set the preroll time.

The preroll time can be set in one-second increments to

 

between 0 and 15 seconds (0 SEC [>> 0 SEC] to 15 SEC

 

[>> 15 SEC]). When an editing controller such as the PVE-

 

500 has been connected, this setting is disabled and the

 

editing controller’s setting is in effect. Operations such as the

 

preroll time setting and the time data switching operation are

 

also performed on the editing controller.

 

Factory default setting: 5 SEC [>> 5 SEC]

 

 

AFTER CUE-UP [> After CUE]: Select the operating mode

STOP [>> STOP]: Stop mode

following cue-up.

∗STILL [>> STILL]: Output still pictures in search mode.

 

 

PLAY START [> PLAY Start]: Set the timing for switching

16 FRAME DELAY [>> 16 delay] to 4 FRAME DELAY

from stop mode to playback mode.

[>> 4 delay]: The larger the numerical value, the longer the

In an editing system including an editing controller such as

delay. By adjusting this setting, it is possible to reduce the

the PVE-500, adjusting this setting so that the delay before

phase synchronization time and preroll time during editing.

switching to playback mode is the same on all the decks of

Factory default setting: 5 FRAME DELAY [>> 5 delay] (for

the editing system means that there is no longer a need to

DSR-85) or 4 FRAME DELAY [>> 4 delay] (for DSR-85P)

synchronize the decks for editing, and the preroll time can

 

be shortened.

 

 

 

A1 EDIT CH [> A1 Edit CH]: Determine which audio channel

∗CH-1 [>> CH-1]: Assign to channel 1.

the EDIT PRESET command set on an editing controller

CH-2 [>> CH-2]: Assign to channel 2.

(such as the PVE-500) for A1 is assigned to.

CH-3 [>> CH-3]: Assign to channel 3.

 

CH-1 & CH-2 [>> CH-1&2]: Assign to channel 1 and channel

 

2.

 

 

A2 EDIT CH [> A2 Edit CH]: Determine which audio channel

∗CH-2 [>> CH-2]: Assign to channel 2.

the EDIT PRESET command set on an editing controller

CH-3 [>> CH-3]: Assign to channel 3.

(such as the PVE-500) for A2 is assigned to.

CH-4 [>> CH-4]: Assign to channel 4.

 

CH-3 & CH-4 [>> CH-3&4]: Assign to channel 3 and channel

 

4.

 

 

A MODE CHANGE [> Aud change]: Determine whether or

∗OFF [>> OFF]: Do not permit.

not to permit an insert editing that uses a different audio

ON [>> ON]: Permit.

recording mode (2- or 4-channel mode) from that which

 

was used for the tape loaded in the recorder.

 

 

 

QSDI AUDIO MON [> QSDI A mon]: Determine what type of

∗QSDI [>> QSDI]: Output the input QSDI audio as it is.

audio signal to be output as EE audio when the selected

ANALOG [>> Analog]: Automatically switch audio input

input is QSDI.

selection and output analog audio.

 

AES/EBU [>> AES/EBU]: Automatically switch audio input

 

selection and output AES/EBU format digital audio.

 

SDI [>> SDI]: Automatically switch audio input selection and

 

output SDI format digital audio.a)

a) Displayed only when the optional DSBK-120/120P SDI

 

Input/Output Board is installed.

 

 

 

DISPLAY CONTROL [Display]: Settings related to

Description of settings

indications on the monitor and the unit

 

 

 

CHARA. DISPLAY [> Chara disp]: Determine whether or not

∗ON [>> ON]: Output text.

to output text (such as time code numbers) from the VIDEO

OFF [>> OFF]: Do not output text. (In spite of this setting,

OUT 2 (SUPER) connector.

pressing the MENU button causes menu text to be output.)

 

 

CHARA. POSITION [> Chara pos]: Set the position of text

Use ¿÷˘￿buttons on the menu control panel to adjust

superimposed on output from the VIDEO OUT 2 (SUPER)

the indication position while watching the monitor screen.

connector to the monitor.

 

 

Press the MENU button to confirm the setting and return to

 

the level 1 of the setup menu.

 

 

 

(Continued)

Settings Menu 4 Chapter

Chapter 4 Menu Settings 43