Sony 85P, DSR-85 •SW2, PVE-500, BVE-800, RM-450/450CE, •Left switches, •SW3 (PAL model), •SW3 (NTSC model), •Right switches (RM-450), •Right switches (RM-450CE)

Connection of a video monitor

Set up the following connections to enable monitoring of video and audio signals on a video monitor. In addition to video signals, you can have time data, the DSR-85/85P’s operation mode, alarm messages, and other information displayed as text on the monitor screen by setting “CHARA. DISPLAY” under the DISPLAY CONTROL menu item to “ON” (this is the factory default setting).

For details of menu operations, see Chapter 4.

75 Ω termination switch: ON (or attach a

75 Ω terminator)

Input switches: Set according to the type of input signals.

Video monitor

Audio input			Composite video input
1		2
			VIDEO
	MONITOR		OUT
	AUDIO		2(SUPER)	DSR-85/85P

1Cable with RCA phono plugs (not supplied)

2 75 Ω coaxial cable (not supplied)

Settings on an editing control unit

When connecting an editing control unit, make the settings as follows, according to the model.

PVE-500

No settings are required.

BVE-600/900/910/2000 (NTSC model) or FXE- 100/120

Set the VCR constants as follows.

1	2	3	4	5	6	7	8	9	10	11	12	13	14	15
80 10 00 96 05 05 03 80 0A 08										FE 00		80	5A FF

BVE-600/900/910/2000 (PAL model) or FXE- 100P/120P

Set the VCR constants as follows.

1	2	3	4	5	6	7	8	9	10	11	12	13	14	15
81 10 00 7D 05 05 02 80 0A 07										FE 00		80	4C FF

RM-450/450CE

Set the DIP switches as follows.

•Left switches

7	6	5	4	3	2	1	0
OFF	–	–	OFF	–	–	–	–

•Right switches (RM-450)

7	6	5	4	3	2	1	0
OFF	–	OFF	ON	OFF	OFF	ON	ON

•Right switches (RM-450CE)

7	6	5	4	3	2	1	0
ON	–	OFF	ON	OFF	OFF	ON	ON

BVE-800

Set the DIP switches as follows.

•SW2

1	2	3	4	5	6	7	8
ON	OFF	ON	ON	–	ON	ON	–

•SW3 (NTSC model)

1	2	3	4	5	6	7	8
OFF	ON	OFF	ON	–	ON	OFF	OFF

•SW3 (PAL model)

1	2	3	4	5	6	7	8
ON	ON	OFF	ON	–	ON	OFF	OFF

Settings and Connections 5 Chapter

Chapter 5 Connections and Settings 63