Menu contents (Continued)
DISPLAY CONTROL [Display]: Settings related to |
| Description of settings | |
indications on the monitor and the unit |
|
|
|
|
| ||
OVER DISP HOLD [> Hold OVER]: Determine whether or not | ∗OFF [>> OFF]: Do not hold the OVER indication display. | ||
to hold the OVER indication display on the audio level | ON [>> ON]: Hold the OVER indication display. | ||
meter once the indication lights. |
|
|
|
|
| Note |
|
|
| With “ON” selected, once the display is held it will remain held | |
|
| unless you change the setting to “OFF”. | |
BRIGHTNESS [> Brightness]: Set the brightness of front |
| Set brightness as a percentage of the maximum. | |
panel indicators. |
| ∗100% [>> 100%] | |
| 66% [>> 66%] | ||
| 33% [>> 33%] | ||
|
|
| |
ALARM [> ALARM]: Determine whether alarm messages are |
| ∗ON [>> ON]: Alarm messages are issued. | |
issued or not. |
| OFF [>> OFF]: Alarm messages are not issued. | |
|
|
| |
REF. ALARM [> REF ALARM]: Determine whether alarm |
| ON [>> ON]: Alarm messages are issued. | |
messages related to reference video signal are issued or |
| ∗ON (LIMITED) [>> ON (Limit)]: Alarm messages are issued | |
not. |
| only during recording mode, EE mode, and while editing. | |
|
| OFF [>> OFF]: Alarm messages are not issued. | |
|
|
|
|
TIME CODE [Time code]: Settings related to the time code |
| Description of settings | ||
generator |
|
|
|
|
|
|
| ||
TC MODE [> TC MODE]: Determine whether to use internal |
| ∗INT PRESET [>> INT]: Use internal time code. | ||
time code (generated by the internal time code generator) |
| EXT REGEN [>> EXT]: Use external time code. | ||
or external time code. |
|
|
|
|
|
| Notes |
| |
|
| • To be able to input an LTC signal from external equipment, it | ||
|
| is necessary to install the optional | ||
|
| Code Input/Output Board in this unit. | ||
|
| • When the selected input mode is “QSDI” (the QSDI indicator | ||
|
| is lit in the INPUT MODE display), setting “TC MODE” under | ||
|
| the TIME CODE menu item to “EXT REGEN” causes the | ||
|
| internal time code generator to automatically synchronize | ||
|
| with the external time code input to the unit via the QSDI | ||
|
| interface. | ||
|
|
| ||
RUN MODE [> RUN mode]: Select the time code generator’s |
| ∗FREE RUN [>> FREE RUN]: Time code generator keeps | ||
advancement (RUN) mode. |
| running. | ||
|
| REC RUN [>> REC RUN]: Time code generator only runs | ||
|
| while recording. | ||
|
|
| ||
|
| Note |
| |
|
| Set to “FREE RUN” when carrying out editing with an editing | ||
|
| controller. With the “REC RUN” setting, editing and other | ||
|
| operations will not be carried out correctly. | ||
|
|
| ||
(Only on |
| ∗ON (DF) [>> ON (DF)]: Drop frame mode | ||
DF MODE [> DF mode]: Select whether the time code |
| OFF (NDF) [>> OFF (NDF)]: | ||
generator and time counter operate in drop frame mode or |
|
|
|
|
|
|
|
| |
Normally select drop frame mode, to keep in sync with real |
|
|
|
|
time. The |
|
|
|
|
when using computer graphics, and working on a frame |
|
|
|
|
count basis. |
|
|
|
|
|
|
|
|
|
|
|
|
| (Continued) |
Settings Menu 4 Chapter
Chapter 4 Menu Settings 45