ConnectionsConnectionsfor a CutforEditinga CutSystemEditing System
The following figure shows a cut editing system | For details of connecting devices other than the |
configuration that includes two | 85Ps, refer to the instruction manual for each device. |
as the player and recorder. |
|
When you select assemble or insert editing mode on the editing controller, the EDIT MODE indicator lights on the front panel of the recorder and the recorder automatically enters the selected editing mode.
| |
(player) | QSDI OUTPUT |
1 75 Ω coaxial cable (not supplied)
2
3 Cable with RCA phono plugs (not supplied)
1
QSDI
INPUT
REF.
VIDEO
OUT
and Connections 5 Chapter
MONITOR | VIDEO | REMOTE |
| MONITOR | VIDEO | REMOTE |
AUDIO | OUT 2 |
|
| AUDIO | OUT 2 |
|
| (SUPER) |
|
|
| (SUPER) |
|
3 | 1 | 2 | 1 | 3 | 1 | 2 |
| Composite |
|
| Audio input | Composite |
|
Audio input | video input |
|
| video input |
|
| REF. |
PLAYER | VIDEO IN |
Source monitor | Main monitor |
| RECORDER |
a) For the settings on the editing control unit, | Editing control unit (such as RM- | |
see “Settings on an editing control unit” | ||
450/450CE, | ||
(page 63). |
|
Settings
Settings on the
Switch | Recorder | Player |
|
|
|
REMOTE/LOCAL | REMOTE | REMOTE |
|
|
|
For details of the video/audio input and audio mode settings for the recorder, see “Settings for Recording” (page 19).
Note
Jog audio monitoring is not possible with the recorder and its monitor. For this purpose use the player and its monitor.
About reference video signals
In order to provide stable video and audio signals for analog editing, it is necessary for the
58 | Chapter 5 Connections and Settings |