aREC (record) indicator Lights during recording.

bREC (record) button

When you press this button while holding down the PLAY button, it lights and recording begins.

Note

When the control mode selector is set to REMOTE (the REMOTE indicator is lit), no recording/playcack control buttons other than the STOP button will work. This can be changed with the LOCAL ENABLE menu item (see page 62).

cPREV (previous) button

When pressed once, moves to the start point of the clip containing the current position. When pressed a second time, moves to the start point of the previous clip.

Pressing the PREV button with the PLAY button held down allows you to view fast reverse playback. However, to do this, you need to set the F. FWD/REW menu item under the AUTO EE SELECT menu item (see page 61) to PB.

If cue points are set (see page 33), the PREV button is used to cue up a cue point (see page 41).

dPLAY button

When you press this button, it lights and playback begins. If you press this button during recording, the recording operation is stopped and this unit enters playback mode.

eNEXT button

When pressed once, moves to the start point of the next clip. However, when this button is pressed while in the last clip, it moves to the end point of that clip.

Pressing the NEXT button with the PLAY button held down allows you to view fast forward playback. However, to do this, you need to set the F. FWD/REW menu item under the AUTO EE SELECT menu item (see page 61) to PB.

If cue points are set (see page 33), the NEXT button is used to cue up a cue point (see page 41).

fSTOP button

Press this button to stop the recording or playback operation.

5PANEL SELECT section

Note

The buttons of the PANEL SELECT section cannot be turned on or off during simultaneous recording and playback.

aMENU button

Press this button to display the menu on the monitor screen

PANEL SELECT

R P EXT

 

 

 

 

 

 

 

 

 

 

 

3 EXT button

 

 

 

2 P button

 

 

 

 

 

 

 

 

 

1Chapter

 

 

 

 

1 R button

 

 

 

 

 

Overview

a R (recorder) button

 

Press this button, turning it on, to put the control panel of

 

the unit into a state in which the only operations possible

 

are recording operations. The buttons which function in

 

this state are the REC button, PLAY button (only when

 

pressed at the same time as the REC button), and the STOP

 

button.

 

b P (player) button

 

Press this button, turning it on, to put the control panel of

 

the unit into a state in which the only operations possible

 

are playback operations. The REC button and PLAY

 

button do not function, even if pressed at the same time.

 

c EXT (external) button

 

When you have connected multiple DSR-DR1000A/

 

DR1000AP units in a cascade sequence and want to

 

control the other units from a one unit, press the EXT

 

button of the controlling unit, turning it on.

 

You can connect multiple DSR-DR1000A/DR1000AP units for multi-simultaneous playback. For details, see “Connecting Multiple Units for Simultaneous Playback (Multi-Simultaneous Playback)” on page 39.

6Menu/clip control section

1 MENU button

2RESET button

MENU RESET SET

3 SET button

CUE

INOUT

4 Cursor/clip operation buttons

and the time counter display. Press it again to exit the menu display.

Location and Function of Parts

17