Operations Network 5 Chapter

NETWORK MENU

 

>01HOST1

ADDRES BOOK

 

01: HOST1

 

Time counter display

02: HOST2

 

 

03: HOST3

 

 

04: HOST4

 

 

05: HOST5

 

 

06: HOST6

 

 

 

 

 

Monitor screen

Select a destination and press the k (OUT) button to display the information for that destination. You can change the information as required (see page 51).

Registering Host information in an Address Book

The figure below shows the ADDRESS BOOK DATA screen. Enter a host name (up to 8 characters) and the host information, consisting of the IP address, user name, password, and folder to use in communications. The password and folder name do not have to be entered if they have not been specified.

Note

Host name is a general term for destination data.

ADDRESS BOOK DATA

 

 

< 01: AAAAAAAA

>

Host name

HOST:

 

 

 

 

IP : 000.000.000.000

 

IP address

 

USER:

 

 

User name

 

 

PASS:

 

 

Password

 

 

DIR :

 

 

Folder to use in

 

 

 

 

 

communications

APPEND : (<-)+SET KEY

TO MENU : MENU KEY

Use the following procedure to register host information.

1 Select HOST and press the k (OUT) button.

The HOST PRESET screen appears.

HOST PRESET

< 01: AAAAAAAA > HOST:

SHIFT : (<-)(->)KEY

CHAR SELECT : JOG DIAL

DELETE : RESET KEY

DATA SET : SET KEY

TO MENU : MENU KEY

2 Enter the host name.

To enter characters

Rotate the search dial until the desired character appears. Characters appear in the following order when you rotate the search dial in the clockwise direction.

A to Z, [, ], ^, _, `, a to z, {, , }, ~, !, ", #, $, %, &, ', (, ), *, +, -, ., /, 0 to 9, :, ;, <, =, >, ?, @

Characters appear in the reverse order when you rotate the search dial in the counterclockwise direction.

To delete a character after entering it, press the RESET button.

To move the cursor

Press the K (IN) or k (OUT) button.

To confirm a host name

Press the SET button.

You are returned to the ADDRESS BOOK DATA screen.

3 Next enter the IP address (IP), user name (USER), password (PASS), and folder to use in communications (DIR).

Notes

•When you are entering an IP address, the only characters which appear as you rotate the search dial are digits.

•Do not specify a folder name (DIR) to exchange data between two DSR-DR1000A/DR1000AP units. Communications will not be carried out correctly if a folder is specified.

4 When you have set all the required items, check the information on the ADDRESS BOOK DATA screen and confirm by pressing the SET button with the K (IN) button held down.

50 Creating and Editing an Address Book