Settings and Connections 7 Chapter

Sync phase

Subcarrier phase

Reference line

Align the sync and subcarrier phases of the black burst signal to the reference line.

5 Output the player 1 signal from the PVE-500. 6 Press the A channel button on the vectorscope.

This displays the sync and subcarrier phases (composite signals only) of the signal from player 1.

7 On player 1, adjust the front panel SYNC PHASE and SC PHASE controls, using a Phillips screwdriver, so that the output from player 1 on channel A is in correct phase alignment with the black burst signal on channel B.

This indicator

 

 

 

This indicator

moves as you

 

 

 

moves as you

turn the SYNC

 

 

turn the SC

PHASE control.

 

 

PHASE control.

 

 

 

 

Adjust the sync and subcarrier phases of the output signal from player 1.

Note

When component signals are used the subcarrier phase indicator does not appear.

8 Output the player 2 signal from the PVE-500, and repeat steps 6 and 7 to adjust the sync and subcarrier phases of the output from player 2.

90 Adjusting the Sync and Subcarrier Phases