Sony DSR-DR1000A, DSR-DR1000AP To delete a host entry, To change a host entry, Editing an Address Book, To delete all of the entries in an address book

ADDRESS BOOK DATA

< 01: AAAAAAAA > HOST: HOST1 IP : 192.168.000.001 USER: USER1

PASS: ********

DIR : /user/local/bin/

APPEND : (<-)+SET KEY

TO MENU : MENU KEY

The host data is saved under registration number 01.

To cancel the registration without saving any data

Press the MENU button.

Editing an Address Book

You can change the information in an address book entry and save it under the same registration number or a different registration number.

In the host list (see “If the address book already contains data” on page 49), select the entry you want to change and press the k (OUT) button. The data for the selected entry appears.

ADDRESS BOOK DATA
< 01: AAAAAAAA	>
HOST: HOST1

IP : 192.168.000.001

USER: USER1

PASS: ********

DIR : /user/local/bin/

DELETE : RESET KEY

MODIFY : SET KEY

APPEND : (<-)+SET KEY

TO MENU : MENU KEY

To delete a host entry

Press the RESET button. The entry is deleted and the selected host name is removed from the list.

Note

A host entry cannot be deleted while that host is sending data to or receiving data from this unit, or in sending or receiving standby. Entries cannot be deleted if the address book itself is being sent or received. A warning message appears if you press the RESET button under these circumstances, and the deletion is cancelled.

To change a host entry

1 Select the entry that you want to change and press the

k(OUT) button.

The setting screen for the selected entry appears.

2 Refer to the procedure in “Registering Host information in an Address Book” and change the entry as required.

3 To save the changes under the same registration number, press the SET button. To save the changes under another registration number, press the SET button with the K (IN) button held down.

Pressing the SET button with the K (IN) button held down adds the changes to the end of the host data list.

Note

A host entry cannot be changed while that host is sending data to or receiving data from this unit, or in sending or receiving standby. Entries cannot be changed if the address book itself is being sent or received. A warning message appears if you press the SET button in step 3 under these circumstances, and the change is cancelled.

To delete all of the entries in an address book

Press the RESET button in the screen that displays all of the entries in the host list (see “If the address book already contains data” on page 49).

The message “ALL DELETE OK ?” appears on the monitor, and the message “All Del OK?” appears in the time counter display. Press the SET button to delete all of the entries. Press the RESET again to cancel the deletion.

Note

A host entry cannot be deleted while that host is sending data to or receiving data from this unit, or in sending or receiving standby. Entries cannot be deleted if the address book itself is being sent or received. A warning message appears if you press the RESET button under these circumstances, and the deletion is cancelled.

Operations Network 5 Chapter

Creating and Editing an Address Book 51