Setting Menu 6 Chapter

SETUP MENU

 

>> 75%

DISPLAY CONTROL

 

 

BRIGHTNESS

:75%

 

Time counter display

100%

 

 

 

 

 

 

 

* 75%

 

 

 

50%

 

 

 

 

 

 

 

Monitor screen

7 Press the j or J (CUE) button to change the setting of the item.

SETUP MENU

 

>> 50%

DISPLAY CONTROL

 

 

BRIGHTNESS

:75%

 

Time counter display

100%

 

 

 

* 75%

 

 

 

 

 

 

 

50%

 

 

 

 

 

 

 

Monitor screen

8 To change other settings, press the K (IN) button to return to the previous screen, then repeat steps 5 to 7 as required.

9 When you have completed the settings, press the SET button.

The message “NOW SAVING...” appears on the monitor screen, and “Saving...” appears in the time counter display, while the new settings are saved in memory.

When the saving operation is completed, the monitor screen and time counter display return to their normal indications.

Notes

•If you power off the unit before saving operation is completed, settings may be lost. Wait until the saving is completed before powering off the unit.

•If, instead of pressing the SET button, you press the MENU button, the new settings are not saved. The message “ABORT !” appears on the monitor screen and “Abort !” in the time counter display for about 0.5 second, and the system exits the menus. To change more than one setting, be sure to press the SET button after making the settings.

Meanings of indications on the monitor screen

On-screen indication

Meaning

 

 

Right-pointing arrow (k) at

Pressing the k (OUT)

the right of a menu item

button switches to the next

See step 1 of the foregoing

lower menu level or to a

operating procedure.

setting selection screen.

 

 

Left-pointing arrow (K) at

Pressing the K (IN) button

the left of a menu item

returns to the previous

See step 4 of the foregoing

(higher) menu level.

operating procedure.

 

 

 

Character string at the right of

Current setting of the menu

a menu item

item

 

When shown with a colon

 

(:):

 

the current setting is the

 

same as the factory

 

default setting.

 

See step 4 of the

 

foregoing operating

 

procedure.

 

When shown with a raised

 

dot (•):

 

the current setting is

 

different from the factory

 

default setting.

 

See step 2 of the

 

operating procedure in

 

“Changing the Settings

 

of Enhanced Items.”

An asterisk in a complete list

Factory default setting

of settings

 

See step 6 of the foregoing

 

operating procedure.

 

 

 

Displaying Enhanced Items

The factory default setting is not to display enhanced items.

To display enhanced items, set the MENU GRADE menu item (see page 70) to ENHANCED, following the procedure in the previous section “Changing the Settings of Basic Items.” (In step 3, first select “MENU GRADE,” and next select “ENHANCED,” then press the SET button to save the setting in memory.)

With this done, when you press the MENU button and the

k(OUT) button to display the setup menu, all basic and enhanced items on menu level 1 appear.

Changing the Settings of Enhanced Items

To change the settings of enhanced items, first carry out the procedure in the previous section “Displaying Enhanced Items,” then proceed as follows.

74 Changing Menu Settings