Overview 1 Chapter
When in 2 CH (48 kHz or 44.1 kHz) mode:
Output | Output audio channels |
connectors |
|
|
|
AUDIO OUT 1/3 | Audio channel 1 (when 1/2 CH is |
| selected) or silent (when 3/4 CH is |
| selected) |
|
|
AUDIO OUT 2/4 | Audio channel 2 (when 1/2 CH is |
| selected) or silent (when 3/4 CH is |
| selected) |
|
|
When in 4 CH (32 kHz) mode:
Output | Output audio channels |
connectors |
|
|
|
AUDIO OUT 1/3 | Audio channel 1 (when 1/2 CH is |
| selected) or audio channel 3 (when 3/ |
| 4 CH is selected) |
|
|
Output | Output audio channels |
connectors |
|
|
|
AUDIO OUT 2/4 | Audio channel 2 (when 1/2 CH is |
| selected) or audio channel 4 (when 3/ |
| 4 CH is selected) |
|
|
The current playback audio mode is indicated by the PB Fs display on the front panel.
cMONITOR connector (RCA phono jack)
This connector outputs audio signals for monitoring. The audio signals to be output from this connector can be selected with the MONITOR SELECT button and METER
DIGITAL AUDIO
1/2 - IN - 3/4
(AES/EBU)
1/2 - OUT - 3/4
SDI
IN OUT1 OUT2
4 SDI OUT1/OUT2 connectors
3SDI IN connector
2DIGITAL AUDIO (AES/EBU) OUT 1/2 and AUDIO (AES/EBU) OUT 3/4 connectors
1 DIGITAL AUDIO (AES/EBU) IN 1/2 and AUDIO (AES/EBU) IN 3/4 connectors
aDIGITAL AUDIO (AES/EBU) IN 1/2 and AUDIO
(AES/EBU) IN 3/4 connectors (BNC type)
Input digital audio signals in AES/EBU format to these connectors.
The left connector (1/2) is for audio channels 1 and 2, and the right connector (3/4) is for audio channels 3 and 4.
bDIGITAL AUDIO (AES/EBU) OUT 1/2 and AUDIO (AES/EBU) OUT 3/4 connectors (BNC
type)
These connectors output digital audio signals in AES/EBU format.
The left connector (1/2) is for audio channels 1 and 2, and the right connector (3/4) is for audio channels 3 and 4.
cSDI IN (Serial Digital Interface input) connector (BNC type)
This connector inputs digital video and audio signals in SDI format. Use the VIDEO button in the video/audio
input setting section (see page 15) to select the required input signal formats. The current input signal selections are indicated in the INPUT signal display section (see page 14).
dSDI OUT1/OUT2 (Serial Digital Interface output 1/output 2) connectors (BNC type)
These connectors output digital video and audio signals in SDI format.
22 Location and Function of Parts