SETUP MENU |
|
| >>> VD top |
OPERATIONAL FUNCTION |
| ||
REPEAT FUNCTION | :V.TOP |
| Time counter display |
REPEAT TOP |
|
| |
* VIDEO TOP | :V.END |
|
|
A POINT |
|
|
|
|
|
|
|
Monitor screen
7 Press the j button to select “A POINT.”
SETUP MENU |
|
| >>> A point | |
OPERATIONAL FUNCTION | ||||
REPEAT FUNCTION |
|
|
| |
|
| Time counter display | ||
REPEAT TOP | :V.TOP | |||
| ||||
* VIDEO TOP | :V.END |
| ||
|
|
|
| |
A POINT |
|
|
| |
|
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
Chapter |
| ||
Monitor screen | |||
| |||
|
| ||
Recording | 8 Press the K (IN) button. |
| |||
and |
| The display changes as follows. | |||
Playback |
| ||||
|
|
|
|
| |
| SETUP MENU |
|
| >> REP TOP | |
| OPERATIONAL FUNCTION |
| |||
|
|
|
|
| |
|
| REPEAT FUNCTION | :OFF |
| Time counter display |
|
| REPEAT MODE |
|
| |
|
|
|
|
|
|
|
| REPEAT TOP | .A |
|
|
|
| REPEAT END | :V.END |
|
|
|
| A PRESET |
|
|
|
|
| B PRESET |
|
|
|
|
|
|
|
|
|
Monitor screen
9 Press the j button to select “A PRESET.”
SETUP MENU |
|
| >> A preset |
OPERATIONAL FUNCTION |
| ||
REPEAT FUNCTION |
|
| Time counter display |
REPEAT MODE | :OFF |
| |
|
| ||
REPEAT TOP | .A |
|
|
REPEAT END | :V.END |
|
|
|
|
|
|
A PRESET |
|
|
|
B PRESET |
|
|
|
|
|
|
|
Monitor screen
10 Press the k (OUT) button.
The A PRESET MODE screen appears. The time code value of the current point A is displayed below the screen title.
A PRESET MODE
A00:00:00:00
INC/DEC : ( )( )KEY
SHIFT : ( )( )KEY
CLEAR : RESET KEY
DATA SAVE : SET KEY
TO MENU : MENU KEY
Monitor screen
11 Use the K (IN) or k (OUT) button to select the digit in the time code value display that you want to change.
Each press of the button causes the digit to the left or right to begin flashing. Holding the button down moves the flashing digit continuously.
If you want to clear the time code value, press the RESET button. The value is cleared to 00:00:00:00, and the leftmost digit begins flashing.
12 Press the J (CUE) or j button to increment or decrement the value of the flashing digit.
Each press of the button increments or decrements the value. Holding the button down increments or decrements the value continuously. To change other digits, return to step 11.
13 Press the SET button to confirm the defined value.
The message “NOW SAVING...” is displayed on the monitor screen and “Saving...” is shown in the time counter display while the new setting is being saved in memory.
Note
The new setting may be lost if you power off the unit during the saving operation. Wait until the saving operation is completed before powering the unit off.
If you want to discard the changed value
Press the MENU button instead of pressing the SET button to return to the menu display, then press the MENU button again to end the menu operation without saving the changed value into memory.
After the saving operation is completed, the monitor screen and time counter display return to the REPEAT FUNCTION setting display as shown in step 9.
38 Playback