Making Basic Network Settings

To use this unit in a LAN environment (see page 48), you need to set this unit’s IP address, subnet mask, and default gateway, and to set up an account with a user name and password. Use the NETWORK CONTROL menu to make these basic network settings.

For the IP address, subnet mask, and default gateway values to use, contact the administrator of your LAN.

For more information about basic menu operations, see page 72.

NETWORK CONTROL

IP ADDRESS

SUB NET MASK

DEFAULT GATEWAY

ACCOUNT

Note

When you have finished making all the settings, power this unit off and reboot it. The settings made in the NETWORK CONTROL menu will be enabled when the unit reboots.

To Set the IP Address

Select IP ADDRESS in the NETWORK CONTROL screen and press the k(OUT) button.

The default value 127.000.000.01 appears, with the leftmost digit 1 flashing. Change the value by using the menu and clip operation buttons.

To select the digit to change

Press the K(IN) or k(OUT) button until the digit that you want to change starts flashing.

To change a numeric value

Press the J(CUE) button to increase a value and the j button to decrease a value.

To return to the value 000.000.000 press the RESET button.

To confirm the IP address

Press the SET button.

To exit without changing the IP address press the MENU button.

To Set the Subnet Mask

Select SUB NET MASK in the NETWORK CONTROL screen and press the k(OUT) button.

The default value 255.255.255.000 appears, with the leftmost digit 2 flashing. Change the value by using the menu and clip operation buttons in the same way as with the IP address.

To Set the Default Gateway

Select DEFAULT GATEWAY in the NETWORK CONTROL screen and press the k(OUT) button. The default value 000.000.000.000 appears, with the leftmost digit 0 flashing. Change the value by using the menu and clip operation buttons in the same way as with the IP address.

To Set Up a User Account

Select ACCOUNT in the NETWORK CONTROL screen and press the k(OUT) button. A screen for the user name and password appears.

Enter a user name and password (up to 8 characters each).

To enter the user name

Select USERNAME and press the k(OUT) button.

A user name screen appears and the cursor begins to flash.

To enter characters

Rotate the search dial until the desired character appears. Characters appear in the following order when the search dial is rotated in the clockwise direction.

A to Z, [, ], ^, -, `, a to z, {, , }, ~, !, ", #, $, %, &, ', (, ), *, +, –, ., /, 0 to 9, :, ;, <, =, >, ?, @

Characters appear in the reverse order when the search dial is rotated in the counterclockwise direction.

To delete a character that you have entered, press the RESET button.

To move the cursor

Press the K(IN) or k(OUT) button.

To confirm the user name

Press the SET button.

To exit without setting a user name, press the MENU button.

To enter a password

Select PASSWORD and press the k(OUT) button.

A password screen appears with the cursor flashing. Use the menu and clip operation buttons to enter a password and confirm it, in the same way as the user name.

Preparations 2 Chapter

Making Basic Network Settings

29