Setting Up the
Camcorder
7-1 Power Supply
The following power supplies can be used with the camcorder.
•
•AC power using the
When a
Before use, charge the battery pack with a
For details, refer to the battery charger operation manual.
7Chapter |
| |
Note on using the battery pack | ||
|
A warm battery pack may not be able to be fully recharged.
Setting | Attaching the battery pack | |
the Up | ||
1 Press the battery pack against the back of the | ||
Camcorder | ||
camcorder, aligning the line on the side of the battery | ||
| ||
| pack with the matching line on the camcorder. | |
|
| |
| Back of camcorder |
Battery pack
Align these lines.
Chapter 7
2 Slide the battery pack down until its “LOCK” arrow points at the matching line on the camcorder.
“LOCK” arrow
Matching line on the camcorder
Detaching the battery pack
Holding the button in, pull the battery pack up.
Detaching the battery pack
If you use both an internal battery pack (attached to the camcorder) and an external battery (connected to the DC IN connector) at the same time, you can avoid breaks in operation due to dead batteries.
When the external battery begins to fail and an internal battery pack is also used
Remove the DC output cable from the DC IN connector. The power source will switch to the internal battery pack.
110 Power Supply