Settings Detailed and Displays Menu 5 Chapter
Item | Description |
COLOR FINE | Adjusts the value more precisely if the |
<A> | adjustment by |
| not satisfactory. |
|
|
OFFSET | Turns the setting of the offset for |
WHITE <B> | channel B ON or OFF. ON: Adds the |
| offset adjusted on this page to the |
| white balance. |
|
|
Sets the offset for the white balance | |
<B> | of channel B, using the color |
| temperature. Adjust the value while |
| looking at the real image because |
| error tends to be bigger for |
| adjustment of high color temperature. |
|
|
COLOR FINE | Adjusts the value more precisely if the |
<B> | adjustment by |
| not satisfactory. |
|
|
4 Set the WHITE BAL switch to the position corresponding to the desired channel (A or B).
Note
If the WHITE BAL switch is not set to A or B when you operate the camcorder, the adjustment value will not be reflected in the output signal.
5 Turn the MENU knob to move the b mark to the item you want to set, and press MENU knob.
The b mark on the left of the selected item changes to a z mark, and the z mark on the left of the setting changes to a ? mark.
6 Turn the MENU knob to change the setting, and press the MENU knob.
The z mark returns to a b mark, and the ? mark returns to a z mark.
To set other items, go back to step 3.
To set the other white balance channel, go back to step 2.
7 To end the menu operation, set the MENU ON/OFF switch to OFF or close the cover of the menu operating section.
Note
When using the OFFSET WHITE function, “+” is displayed as the WARM color temperature indication and
You can assign the desired function to the ASSIGN 1/2 switches and the TURBO GAIN button.
Proceed as follows:
1 Set the MENU ON/OFF switch to ON.
The last accessed menu page appears on the viewfinder screen.
2 Turn the MENU knob until the FUNCTION 1 page appears, then press the MENU knob to select to page.
The current settings of each item appears on the right of the item.
FUNCTION 1 page
U03
TURBO SW | TURBO |
CACHE/INTVAL REC
Item | Description |
ASSIGN SW <1> | Assigns the function to ASSIGN 1 |
| |
|
|
ASSIGN SW <2> | Assigns the function to ASSIGN 2 |
| |
|
|
TURBO SW | Assigns the function to the TURBO |
| GAIN button. |
|
|
3 Turn the MENU knob to move the b mark to the item
corresponding to the switch to which you want to assign the function, and press the MENU knob.
The corresponding ASSIGN SEL window appears.
ASSIGN <1> SEL window
ASSIGN <1> SEL ESC
OFF
PICTURE CACHE ON/OFF
TEST OUT CHARACTER
MARKER
ATW
RETURN VIDEO
LENS RET
REC SWITCH
TURBO SWITCH
90 | Adjustments and Settings from Menus |
|
|