If this is the first time the PAINT menu has been displayed, the CONTENTS page appears.
If the menu has been used before, the last accessed page appears.
3 If the CONTENTS page is displayed, turn the MENU knob to move the b mark to “WHITE,” and press the MENU knob to display the WHITE page.
If a different page is displayed, turn the MENU knob until the WHITE page appears, and press the MENU knob to select the page.
The current setting of each item appears on the right of the item.
WHITE page
| P02 WHITE |
|
|
| ||
| COLOR | TEMP | <A>: | 3200 |
| |
| COLOR | FINE | <A>: | 0 |
| |
| R | GAIN |
| <A>: | 0 |
|
| B | GAIN |
| <A>: | 0 |
|
| D5600K |
| <A>: | OFF |
| |
| COLOR | TEMP | <B>: | 3200 |
| |
| COLOR | FINE | <B>: | 0 |
| |
| R | GAIN |
| <B>: | 0 |
|
| B | GAIN |
| <B>: | 0 |
|
| D5600K |
| : | OFF |
| |
|
|
|
|
| ||
|
|
|
|
|
|
|
Item | Description |
|
| |||
COLOR | Sets the color temperature for the | |||||
TEMP <A> | desired value. Adjust the value while | |||||
|
| looking at the real image because | ||||
|
| error tends to be bigger for | ||||
|
| adjustment of high color temperature. | ||||
|
|
|
| |||
COLOR FINE | Adjusts the value more precisely | |||||
<A> | when the color temperature | |||||
|
| adjustment through COLOR TEMP is | ||||
|
| not satisfactory. |
|
| ||
|
|
|
| |||
R GAIN <A> | Only the value of R GAIN is changed. | |||||
|
|
|
| |||
B GAIN <A> | Only the value of B GAIN is changed. | |||||
|
|
|
| |||
D5600K | Sets the color temperature to | |||||
|
| approximately 5600K. | ||||
|
|
|
|
|
|
|
The above table shows the adjustment of the white balance of channel A.
Items followed by “<B>” are used to adjust the white balance of channel B.
4 Turn the MENU knob to move the b mark to the item you want to set, and press MENU knob.
The b mark on the left of the selected item changes to a z mark, and the z mark on the left of the setting changes to a ? mark.
5 Turn the MENU knob to change the setting, and press the MENU knob.
The z mark returns to a b mark, and the ? mark returns to a z mark.
To set other items, go back to step 3.
6 To end the menu operation, set the MENU ON/OFF switch to OFF or close the cover of the menu operating section.
By setting an offset for the value of auto white balance, you can make the picture warmer or colder.
The OFFSET WHT page of the OPERATION menu allows you to do this setting.
Proceed as follows:
1 Holding down the MENU knob, move the MENU ON/ OFF switch from OFF to ON.
The TOP menu appears.
2 Turn the MENU knob to move the b mark to “OPERATION,” and press the MENU knob.
If this is the first time the OPERATION menu has been displayed, the CONTENTS page appears. If the menu has been used before, the last accessed page appears.
3 If the CONTENTS page is displayed, turn the MENU knob to move the b mark to “OFFSET WHITE,” and press the MENU knob to display the OFFSET WHT page.
If a different page is displayed, turn the MENU knob until the OFFSET WHT page appears, and press the MENU knob to select the page.
The current settings of each item appears on the right of the item.
OFFSET WHT page
16
OFFSET WHT
OFFSET WHITE <A>:
OFF
WARM COOL <A>: 3200
COLOR FINE <A>: 0
OFFSET WHITE <B>: OFF
WARM COOL <B>: 3200
COLOR FINE <B>: 0
Item | Description |
OFFSET | Turns the setting of the offset for |
WHITE <A> | channel A ON or OFF. ON: Adds the |
| offset adjusted on this page to the |
| white balance. |
|
|
When OFFSET WHITE <A> is ON, | |
<A> | sets the offset for the white balance of |
| channel A, using the color |
| temperature. Adjust the value while |
| looking at the real image because |
| error tends to be bigger for |
| adjustment of high color temperature. |
|
|
Settings Detailed and Displays Menu 5 Chapter
Adjustments and Settings from Menus | 89 |
|
|