Controls and Parts of Functions and Locations 2 Chapter
gWARNING indicator
This indicator lights up or flashes when there is a fault in the VTR.
For details, see
hDisplay panel
This displays
For details, see
iREAR TALLY indicator
When the BACK TALLY switch is set to ON, this indicator has the same function as the TALLY indicator.
2-8 Warnings and Indications on the Display Panel
Tape status, battery status and audio level
Audio channel level meter:
When the
When the
Audio channel level meter: When the
When the
Battery status indicator
Fully charged
Nearly dead: “BATT” flashes.
Dead battery (battery must be charged): “BATT” and “E” flash.
Tape status indicator
Full (at beginning)
Close to end: “TAPE” flashes.
End (tape must be replaced): “TAPE” and “E” flash.
Tape status, battery status, and level indicators
32 | Warnings and Indications on the Display Panel |
|
|