Connect the audio output connector of the audio equipment that supplies the line input signal to the AUDIO IN CH1 or CH2 connector.
LINE/MIC/+48 V ON switch:
Set the LINE/MIC/+48 V ON switch for the channel to which the audio out cable is attached to LINE.
Audio equipment
AUDIO IN for
AUDIO IN
When the audio cable is connected to either the AUDIO IN CH1 or CH2 connector with REAR XLR AUTO set to ON on the
When the XLR connection automatic detection function is set to OFF (factory setting), set the AUDIO IN
7-6 Tripod Mounting
You can easily mount and dismount the camcorder on a tripod by using the
1 Attach the tripod adaptor to the tripod.
Tripod adaptor
Camera mount
2 Mount the camcorder on the tripod adaptor.
Slide the camcorder forward along the groove in the adaptor until it clicks.
7 Chapter
Removing the camcorder from the tripod adaptor Setting Upthe Camcorder
Lever
Red button
While pressing the red button against the lever, move the lever in the direction indicated by the arrow.
Removing the camcorder from the tripod adapter
Tripod Mounting 119