Settings Detailed and Displays Menu 5 Chapter

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5-3-9 Setting the CCD Scan Mode

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Since the camcorder has CCDs that use an “all pixels read-

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

out method,” a progressive scan mode is also available in

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

addition to the conventional interlace scan mode.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

You can select either of the following modes using the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FORMAT page of the OPERATION menu.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• I (interlace scan) mode

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• PsF (progressive scan) mode

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Color bars (SMPTE type)

Installing the CBK-FC01 allows you to select the 24P

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

mode (DVW-970 only).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Each mode is described below using timing charts.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

I (interlace scan) mode

CCD output

Color bars (EBU type)

16:9 mode indicator on the color bar display

Video output signal

O: Odd

E: Even

Interlace scan mode timing chart

The video signal of an odd scanning line and that of an even scanning line are output from the CCD alternately. Thus, the timing of the odd-field video signal and even- field video signal are different.

PsF (progressive scan) mode

CCD output

Video output signal

O: Odd

E: Even

Progressive scan mode timing chart

The video signal of an odd scanning line and that of an even scanning line are output from the CCD at the same time. Then they are sent to the memory and separated into odd-field and even-field scanning lines. Thus the timing of an odd-field video signal and an even-field video signal are the same.

94

Adjustments and Settings from Menus