Setting the shutter speed in ECS mode

Proceed as follows:

1 2

1 Set the shutter speed mode to ECS.

ECS:60.00Hz

Example of view finder screen display

for ECS setting operation

2 Turn the MENU knob counterclockwise as seen from the front of the camera to increase the value, or clockwise to decrease the value, until the desired frequency appears.

The frequency range can be changed between 60.1 and 7000 Hz (DVW-970) or between 50.2 and 9000 Hz (DVW-970P).

When the RM-B150/B750 Remote Control Unit is connected

You can set the shutter speed of ECS with the rotary encoder of the RM-B150/B750.

Setting the shutter speed in SLS mode

Proceed as follows:

1 2

1 Set the shutter speed mode to SLS.

SLS: 1/30 : 1FRAME

Example of view finder screen display

for SLS setting operation

2 Turn the MENU knob until the desired number of frames appears.

The number of frames can be set to values in the range 1 to 8, and 16 (1 frame nearly equals to 1/30 second (DVW-970) or 1/25 second (DVW-970P)).

Changing the range of choice of shutter mode and speed settings

You can reduce the time required to select the shutter mode and speed by narrowing the choice of settings in advance. This can be done by using the SHT ENABLE page of the OPERATION menu.

Proceed as follows:

Note

The settings selected on the SHT ENABLE page of the OPERATION menu become invalid when the RM-B150/ B750 Remote Control Unit is connected to the camcorder.

MENU knob

MENU ON/OFF switch

1 Set the MENU ON/OFF switch to ON while holding down the MENU knob.

The TOP menu appears.

2 Turn the MENU knob to move the b mark to

OPERATION.

Recording for Settings and Adjustments 4 Chapter

Setting the Electronic Shutter

61