Settings Detailed and Displays Menu 5 Chapter
Item | Description |
TURBO SW IND | OFF: When you operate the GAIN |
| selector after pressing the TURBO |
| GAIN button once, the video gain is |
| changed according to the GAIN |
| selector operation. |
| ON: When the video gain is boosted |
| to the video gain to the value preset |
| by pressing the TURBO GAIN |
| button once, the video gain is not |
| changed even if you operate the |
| GAIN selector, until you press the |
| TURBO GAIN button once more. |
|
|
3 Turn the MENU knob to move the b mark to the item you want to set, and press MENU knob.
The b mark on the left of the selected item changes to a z mark, and the z mark on the left of the setting changes to a ? mark.
4 Turn the MENU knob to change the setting, and press the MENU knob.
The z mark on the left of the selected item returns to a b mark, and the ? mark on the left of the setting returns to a z mark.
Any of
For TURBO, any of
To change the gain corresponding to another switch position, return to step 3.
5 To end the menu operation, set the MENU ON/OFF switch to OFF or close the cover of the menu operating section.
The menu display disappears, and the current status of the camcorder is shown along the top and bottom of the viewfinder screen.
When the optional
Proceed as follows:
1 Set the MENU ON/OFF switch to ON.
The last accessed menu page appears on the viewfinder screen.
2 Turn the MENU knob until the OUTPUT page appears, then press the MENU knob to select the page.
OUTPUT page
U01OUTPUT
REAR BNC OUT SEL: VBS
Item | Description |
REAR BNC OUT | Selects the type of the video signal to |
SEL | be output from the VIDEO OUT |
| connector. |
| SDI: Outputs the SDI signal. When SDI |
| is selected, connect the VIDEO OUT |
| connector to the SDI IN connector of |
| the video monitor. |
| VBS: Outputs the analog composite |
| video signal. When VBS is selected, |
| connector the VIDEO OUT connector |
| to the VIDEO IN connector of the |
| video monitor. |
|
|
3 Turn the MENU knob to move the b mark to “REAR BNC OUT SEL,” and press the MENU knob.
The b mark on the left of “REAR BNC OUT SEL” changes to a z mark, and the z mark on the left of the setting changes to a ? mark.
4 Turn the MENU knob to change the desired setting, and press the MENU knob.
The z mark returns to a b mark, and the ? mark on the left of the setting returns to a z mark.
5 To end the menu operation, set the MENU ON/OFF switch to OFF or close the cover of the menu operating section.
You can adjust the value of the white balance manually by setting the color temperature.
Proceed as follows:
1 Holding down the MENU knob, move the MENU ON/ OFF switch to ON.
The TOP menu appears.
2 Turn the MENU knob to move the b mark to “PAINT,” and press the MENU knob.
88 | Adjustments and Settings from Menus |
|
|