| |
Shoulder Pad Position | Cover (Not Supplied) |
You can shift the shoulder pad from its center position (factory setting) backward by up to 10 mm (3/8 inch) or forward by up to 25 mm (1 inch). This adjustment helps you get the best balance for shooting with the camcorder on your shoulder.
Proceed as follows:
1,3
| Bottom |
2 | Shoulder pad |
|
Adjusting the shoulder pad position
1 Raise the lever in the center of the shoulder pad to unlock the shoulder pad.
2 Slide the shoulder pad backward or forward until it is in the most convenient position.
3 Bring down the lever to lock the shoulder pad in the selected position.
Attach the rain cover (part number
When a shoulder | When you use a |
belt is not used, | shoulder strap, |
cover the holes | use these holes. |
on the rain cover | For details, see |
with caps. | the following |
| diagram. |
Rear
Front
Velcro tape | Drawstring |
Pass the shoulder strap post clearly through this hole on the rain cover.
Insert the viewfinder barrel here with the eyecup out and fasten the drawstring around the eyecup.
Drawstring
Velcro tape
Velcro tape
Camcorder the Up Setting 7 Chapter
Adjusting the Shoulder Pad Position / Putting on the Rain Cover (Not Supplied) | 121 |
|
|