Sony HCD-C5 service manual Tuner PACK, D. C. FAN M901, Ucom BOARD, AMP Power Board

HCD-C5

3-14. TUNER PACK, D. C. FAN (M901)

Note for re-installation

When installing the tuner pack, insert the three harnesses connected to CN105 and connected to CN106 and connected to CN108 of the AUDIO board, in between the flat cable (11 core or 15 core) and the tuner pack in the direction of the arrow so that the flat cable

(11 core or 15 core) must be inserted.

CN108

D.C.fan (M901)

CN105

CN106
	wire (flat type)
AUDIO board	(11 core or 15 core)
	tuner pack

2wire (flat type)

(11 core or 15 core)

4 connector (CN105)

5 D.C. fan

(M901)

1 screw (+BV 3 x 8)

3tuner pack

(After slanted toward outside, remove it straight up toward outside.)

3-15. UCOM BOARD, AMP POWER BOARD

8AMP POWER baord

CN852	7 board to board
	connector

Note for re-installation
(routing the harnesses)		2 wire (flat type)
Be careful that the two harnesses between		(19 core) (CN203)
CN995 and CN992 of the power transformer
(T900) and the POWER board must not
contact the heat sink (IC902) on the POWER
board and the flat cable (19 core) that
is inserted to CN203 on the UCOM board.
heat sink (IC902)	wire (flat type)
	(19 core)
CN995
POWER baord	CN203
	AMP POWER
	board

1wire (flat type)

(19 core) (CN101)

9 UCOM board

CN205

CN206

A

	5 board to board
	connector
A	4 two screws
	(+BVTT 3 x 5)
CN901	6 wire (flat type)
	(16 core) (CN201)

3connector (CN851)

UCOM board

CN851

CN992 power transformer (T900)

19