Playback 4 Chapter

4-1 Playback

4-1-3 Dynamic Motion Control (DMC) Playback

Overview

DMC playback allows you to vary the playback speed

while recording, and then provide immediate DMC

for a certain section of a tape, in variable speed mode

playback of those highlights.

and store the varying speed in memory for later

 

playback at the same varying speed.

During DMC playback the tape moves as shown in the

For example, during a live broadcast of a sporting

following figure.

event you can set the start and end points of highlights

 

On-air start point

Preroll point

Speed variation start point

Speed variation end point On-air end point

Waiting for the on-air cue

Stop

 

 

 

before starting DMC

Press the CUE/PLAY button.

 

playback

 

 

 

 

Press the CUE/PLAY button

Normal speed

 

playback

DMC playback

 

again at the on-air cue.

Normal speed playback

 

 

Stop

Starting DMC playback

 

immediately after preroll

Press the LEARN button.

 

Normal speed

DMC playback

Normal speed playback

playback

Storing a varying playback speed in memory

To store the playback speed for DMC playback, use the following procedure.

Z

1Press the DMC EDIT button, turning it on.

2While playing back the recorded tape, press the ENTRY button and one of the following buttons simultaneously, to set the start and end points.

•On-air start point: PLAY IN button

•Speed variation start point: STUNT IN button

•Speed variation end point: STUNT OUT button

•On-air end point: PLAY OUT button

Each press turns the corresponding button on.

1,4 5 2 7 3 3,4,6

4-6Chapter 4 Playback