Chapter9 SetupMenus
Menu items in the range 600 to 650, relating to the time code generator (Continued)
Item number | Item name |
| Settings | ||||||
|
|
|
|
|
|
|
|
|
|
621 | 24F STARTING TC SEL |
| Select one of the following settings for time code conversion from 24F to 25F. | ||||||
| (In 50i or 25PsF mode |
|
|
|
|
|
| : Do not set the starting TC | |
|
| OFF | |||||||
| only. Not displayed when |
| ON: Set the starting TC | ||||||
| operating in |
|
|
|
|
|
|
|
|
| mode.) |
| To set the 24F starting TC | ||||||
|
|
| Press the F5 (SET) button with this menu item displayed in the menu display, to | ||||||
|
|
| enter the starting TC setting mode. You can then set the user starting TC digit by | ||||||
|
|
| digit using the F1 (PREV) button and F2 (NEXT) buttons for digit selection. When | ||||||
|
|
| all required digits have been set correctly, press the F5 (SET) button again to | ||||||
|
|
| save the starting TC and exit from the ID code setting mode. | ||||||
|
|
|
|
|
|
|
|
| |
| 25F STARTING TC SEL |
| Select one of the following settings for time code conversion from 25F to 24F. | ||||||
| (In 24PsF or 23.98PsF |
| OFF | : Do not set the starting TC | |||||
| mode only. Not displayed |
| ON: Set the starting TC | ||||||
| when operating in 720P- |
|
|
|
|
|
|
|
|
| line mode.) |
| To set the 25F starting TC | ||||||
|
|
| Press the F5 (SET) button with this menu item displayed in the menu display, to | ||||||
|
|
| enter the starting TC setting mode. You can then set the user starting TC digit by | ||||||
|
|
| digit using the F1 (PREV) button and F2 (NEXT) buttons for digit selection. When | ||||||
|
|
| all required digits have been set correctly, press the F5 (SET) button again to | ||||||
|
|
| save the starting TC and exit from the ID code setting mode. | ||||||
|
|
|
|
|
|
|
| ||
622 | 24F JUMPING TC SEL |
| Select one of the following settings for time code conversion from 24F to 25F. | ||||||
| (In 50i or 25PsF mode |
| : Set JUMPING TC to “STARTING TC | ||||||
| only. Not displayed when |
| |||||||
| operating in |
| |||||||
| mode.) |
| +1H : Set JUMPING TC to “STARTING TC +1H”. | ||||||
|
|
| +2H : Set JUMPING TC to “STARTING TC +2H”. | ||||||
|
|
| +3H : Set JUMPING TC to “STARTING TC +3H”. | ||||||
|
|
| 0H : Set JUMPING TC to “STARTING TC”. | ||||||
|
|
|
|
|
| ||||
| 25F JUMPING TC SEL |
| Select one of the following settings for time code conversion from 25F to 24F. | ||||||
| (In 24PsF or 23.98PsF |
| : Set JUMPING TC to “STARTING TC | ||||||
| mode only. Not displayed |
| |||||||
| when operating in 720P- | ||||||||
| line mode.) | +1H : Set JUMPING TC to “STARTING TC +1H”. | |||||||
|
| +2H : Set JUMPING TC to “STARTING TC +2H”. | |||||||
|
| +3H : Set JUMPING TC to “STARTING TC +3H”. | |||||||
|
| 0H : Set JUMPING TC to “STARTING TC”. | |||||||
| Menu items in the range 651 to 699, relating to the UMID | ||||||||
|
|
|
|
|
|
|
|
|
|
Item number | Item name |
| Settings | ||||||
|
|
|
| ||||||
651 | UMID OUTPUT |
| Select UMID output and the UMID type. | ||||||
|
|
| off | : Do not output UMID. | |||||
|
|
| BASIC: Output Basic UMID. | ||||||
|
|
| EXTND: Output Extended UMID. | ||||||
|
|
|
| ||||||
|
|
| Notes |
| |||||
|
|
| • Even if EXTND is selected, Basic UMID is output if Basic UMID is recorded on | ||||||
|
|
| the tape being played back. | ||||||
|
|
| • When operating in 720P active scan line mode, UMID is not output. | ||||||
|
|
|
|
|
|
|
|
|
|