6-3 Tele-File Menu

Setting display area

Displays the setting of the currently selected data type, and a cursor (“*” or “>”).

The meaning of the cursor symbols is as follows:

*: Indicates that the mode is clip data display mode or attribute data display/modify mode, and that data is selected.

>: Indicates that the mode is clip data modify mode or attribute data display/modify mode, and prompts for data entry or modification.

Menu items (functions) Display menu items (functions).

These are common for all of the data items in clip data display mode. The function assignments for each item are as follows.

Chapter6 Tele-File

 

 

 

 

Clip data display mode menu items

Item name

 

Setting

 

 

 

 

F1

(ATTRIB)

 

Selects attribute data display/modify mode.

 

 

 

For details about attribute data display/modify mode, see Section 6-3-5 “Displaying and Modifying Attribute

 

 

 

Data” (page 6-11).

 

 

 

 

 

F2

(SELECT)

 

Selects a data modification mode for the data selected in the clip. The cursor changes from “*” to “>”.

 

 

 

 

 

 

 

Note

 

 

 

 

In the following cases, the SELECT item does not appear, and it is not possible to select a data

 

 

 

modification mode.

 

 

• When setup menu item 133 is set to REMOTE

 

 

• When the memory label itself is write protected

 

 

 

For more information about clip data modifications, see Section 6-3-3 “Modifying Clip Data” (page 6-7).

 

 

 

 

F3

(T)

 

Selects data in a clip.

 

 

 

With each press, the “*” cursor moves to select the previous data item. The display scrolls to the left when

 

 

 

the cursor moves to data that is not currently displayed.

 

 

 

 

F4

(t)

 

Selects data in a clip.

 

 

 

With each press, the “*” cursor moves to select the next data item. The display scrolls to the right when the

 

 

 

cursor moves to data that is not currently displayed.

 

 

 

 

F5

(UNDO)

 

Selects undo check mode. This button appears and is enabled when data has been modified after being

 

 

 

read from the Tele-File label.

 

 

 

For more information about undo check mode, see Section 6-3-4 “Undo/Resume Functions” (page 6-10).

 

 

 

 

F6

(WR/EXT)

 

Writes data and exits from the Tele-File menu (return to function menu page 5).

 

 

 

 

 

Note

If you attempt to change clip data that is write- protected, the message “PROTECTED CLIP!” appears, and it is not possible to change the data. Refer to “To make write protect, mark, and recording start point settings” (page 6-9), and remove the write- protect setting.

6-4Chapter 6 Tele-File