5-1 Overview
This unit allows the use of shot marks. Shot marks are indications at desired points on a tape which enable faster cuing.
Types of shot mark
On this unit, you can write post marks by a button operation during playback, while stopped, or during a search. It is possible to modify or erase the post marks. This chapter describes the use of shot marks including post marks.
First, the shot mark functions of this unit are described in simple terms.
Reading shot marks
This unit reads in shot marks written on a tape and stores them in memory (to a maximum of 200).
Once this data is stored in this unit, it is preserved even when the power is turned off.
Writing and erasing shot marks
Post marks can be written at any point on a tape, and also erased or rewritten.
Shot mark list operations
On the monitor, you can display a list of the shot marks read in by this unit, select required shot marks, delete shot marks, and so on. You can also add a memo mark (#) to a shot mark in the list.
During tape playback, you can add virtual shot marks to the list. This is not written on the tape itself.
Cuing up to shot marks
By selecting a desired shot mark from the shot mark list, you can cue up immediately to that position. By means of a button operation, you can also cue up to the shot marks adjacent to the current tape position (index function).
Shot data display
When the tape includes shot data (camera, time, and other information captured at the time of shooting), you can read this in, and display the details on a monitor. It is also possible to display the shot mark list and shot data simultaneously.
Sorting shot marks by cassette
When the tape includes shot data, this unit recognizes which cassette each shot mark comes from. You can therefore sort the
Function Mark Shot 5 Chapter
5 Chapter
Mark Shot
Function
Chapter 5 Shot Mark Function |