Menu items in the range 300 to 399, relating to editing operations (Continued)

Item number

Item name

 

Settings

 

 

 

 

 

 

 

 

 

 

 

337

EXTERNAL REFERENCE

 

Select the signal used when this unit is set up by setup menu item 309 and

 

SELECT

 

F2(OUTREF) in function menu page 4 to use an external reference video signal.

 

 

 

HD

: Use a high definition reference video signal. Input a three-valued (positive

 

 

 

and negative) sync signal to the REF.VIDEO INPUT connector.

 

 

 

SD : Use a reference video signal. Input a video signal with chroma burst (VBS)

 

 

 

or a monochrome video signal (VS) to the REF.VIDEO INPUT connector.

 

 

 

 

 

 

 

 

 

 

 

Note

 

 

 

 

The setting is HD when operating in 24PsF or 23.98PsF mode, and this item is

 

 

 

not displayed.

 

 

 

 

 

 

 

 

 

 

338

OUTPUT AUDIO/TC

 

Set the audio (AES/EBU and analog) and time code output phase.

 

PHASE

 

HD

: Sync with HDSDI output phase.

 

 

 

SD

: Sync with SD output phase.

 

 

 

 

 

 

 

 

 

 

 

 

 

Note

 

 

 

 

 

 

The setting is HD when operating in 24PsF or 23.98PsF mode, and this item is

 

 

 

not displayed.

 

 

 

 

 

 

 

 

 

 

 

 

Menu items in the range 400 to 499, relating to preroll

 

 

 

 

 

 

 

 

 

 

 

Item number

Item name

Settings

 

 

 

 

 

 

 

401

FUNCTION MODE

Select the state that the unit goes into after a cuing-up operation.

 

AFTER CUEUP

 

 

 

 

: Stop (the “stop mode”)

 

STOP

 

 

 

 

STILL: Still playback (in search mode)

 

 

 

 

 

 

 

 

 

 

 

Note

 

 

 

 

 

When controlling this unit from an editor with the standard constants set, select

 

 

 

“STOP”.

 

 

 

 

 

 

 

 

402

TIME REFERENCE FOR

When prerolling a tape with time code discontinuities, select whether or not to use

 

PREROLL

CTL pulses to count time code from before a discontinuity.

 

 

 

CTL

: Use CTL pulses to count time code.

 

 

 

TC: Do not use CTL pulses to count time code.

 

 

 

 

 

403

AUTOMATIC PREROLL

Select whether or not the edit IN point is automatically set by pressing the

 

REFERENCE ENTRY

PREROLL button, when the IN point is not set before starting preroll.

 

 

 

 

: IN point is not set automatically.

 

 

 

DIS

 

 

 

ENA:

 

IN point is set automatically.

 

 

 

 

405

CUEUP BY CTL

Select the tape transport mode when cuing. This setting is valid only when the

 

 

 

function menu item CTL/TC is set to CTL.

 

 

 

CAP.

: During cuing up, the tape transport is in the “pinch ON” state (maximum

 

 

 

tape speed 10 times normal).

 

 

 

REEL : During cuing up, the tape transport is in the “pinch OFF” state. As the

 

 

 

tape approaches the cue up point and the tape speed drops, the tape transport

 

 

 

switches to the “pinch ON” state.a)

 

 

 

To give priority to editing accuracy, select “CAP”.

 

 

 

 

 

 

 

 

 

 

 

a)When controlled from an editor (BVE-2000/9100 etc.), selecting “REEL” allows high-speed cuing up.

Chapter9 SetupMenus

Chapter 9 Setup Menus 9-15